Weltem Americool HPC-3000 User Manual

page 15
Owner’s Manual
HPC-3000 / WPC-4000 / HPC-5000 / WPC-7000 / WPC-9000 / WPC-15000
6. ALARM
• Alarm indicator light blinks and indicates abnormal system operaon.
• If Alarm occurs, compressor stops.
• System operaon stops when ALARM light is acvated /blinking longer than
3 minutes.
7. CURRENT TEMP
• Room cool mode displays current room temperature in display in Fahren-
heit
• SPOT / COOL Mode displays outlet (cool air) temperature during normal
operaons.
• In order to change °F to °C, press SPOT / COOL and ROOM / COOL buons
together for 2 seconds.
• C will blink 2 mes and the gure will change to °C
• ALARM codes blink and are displayed when abnormal operaon occurs.
8. TARGET TEMP
• Displays the unit set temperature for ROOM COOL mode only
OFF-TIMER: Enter to Timer Seng Mode if you press BLOWER Buon and SPOT/
COOL Buon together for 1 seconds. Press UP/DOWN Buon to set the mer un
-
l it shows the gure you want to set. Aer 5 seconds, the gure will be memo-
rized and the compressor will stop aer the me set.
AUTO RESTART: If the unit goes o due to an electrical interrupon, the unit will
automacally restart when the power resumes.
MAINTENANCE
Filter Cleaning
1. To clean the evaporator lter, pull the front lter guard forward from the top
unl the guard is open (in an angled posion) and resng on the supporng
cables.
2. Slide the lter up and use a vacuum cleaner to remove the dust from the
lter.

Weltem Americool HPC-3000 Specifications

General

Brand	Weltem
Model	Americool HPC-3000
Category	Air Conditioner
Language	English