Weltem Americool HPC-3000 User Manual

page 20
Owner’s Manual
HPC-3000 / WPC-4000 /HPC-5000 / WPC-7000 / WPC-9000 / WPC-15000
Troubleshoong Chart
Symptom Possible Causes Correcve Acon
Water leakage
High water level in conden
-
sate tank
• Remove blockage from drain
hose
• Remove any object stuck un
-
derneath of the black panel
under the water tank
The unit doesn’t work
• Check the ulity to verify
that power is available to
the unit
• Verify that the power cord
is connected
• Reset the circuit breaker and
restart the unit
• Connect the power cord
No cold air ows from the
cold air outlet
• Ambient air cannot be
properly cooled if the lter
is dirty and not regularly
cleaned
• Compressor restart in 2
minutes aer turning o to
protect the compressor
• The ambient air tempera
-
ture may be too high
• Clean air lter
• Verify that 2 minutes have-
passed since the compressor
o
• The temperature of the com
-
pressor can be higher when
the ambient temperature is
too high. The compressor will
not work unless the ambient
air temperature is within the
acceptable operang range
of the unit
Water ow can be heard
aer compressor shuts o
No cause
Common to hear coolant ow
-
ing aer unit shuts o
Alarm displays “FT” with less
than half of the condensate
water in the tank
Spring is possibly broken
Replace the spring
(see Maintenance secon)

Weltem Americool HPC-3000 Specifications

General

Brand	Weltem
Model	Americool HPC-3000
Category	Air Conditioner
Language	English