EasyManuals Logo

Wen 3920 User Manual

Wen 3920
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
SPECIFIC RULES FOR THE SCROLL SAW
WARNING: Do not operate the scroll saw until it is assembled and adjusted. Do not operate
the scroll saw until you have read and understood both the following instructions and the warn-
ing labels on the scroll saw.
BEFORE OPERATING:
1. Check for both proper assembly and proper alignment of moving parts.
2. Understand the function and proper use of the ON/OFF switch.
3. Know the condition of the scroll saw. If any part is missing, bent, or does not operate properly, replace the
component before attempting to operate the scroll saw.
4. Determine the type of work you are going to be doing. Properly protect your body including your eyes,
hands, face, and ears.
5. To avoid injury caused by pieces thrown from accessories, use only recommended accessories designed
for this saw. Follow the instructions supplied with the accessory. The use of improper accessories may cause
risk of injury.
6. To avoid contact with rotating equipment:
- Do not put your fingers in a position where they risk contacting the blade if the work piece
unexpectedly shifts or your hand unexpectedly slips.
- Do not cut a work piece too small to be held safely.
- Do not reach under the scroll saw table when the motor is running.
- Do not wear loose clothing or jewelry. Roll long sleeves above the elbow. Tie back long hair.
7. To avoid injury from accidental startups of the scroll saw:
- Make sure to turn OFF the switch and unplug the power cord from the electric outlet before chang-
ing the blade, performing maintenance or making adjustments.
- Make sure the switch is OFF before plugging in the power cord to an electric outlet.
8. To avoid injury from a fire hazard, do not operate the scroll saw near flammable liquids, vapors or gases.
9. To avoid back injury:
- Obtain help when raising the scroll saw more than 10 inches (25.4 cm). Bend your
knees when lifting the scroll saw.
- Carry the scroll saw by its base. Do not move the scroll saw by pulling on the power cord. Pulling on
the power cord could cause damage to the insulation or the wire connections resulting in electric
shock or fire.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wen 3920 and is the answer not in the manual?

Wen 3920 Specifications

General IconGeneral
BrandWen
Model3920
CategorySaw
LanguageEnglish

Related product manuals