9
ASSEMBLY AND ADJUSTMENTS
UNPACKING
Carefully unpack the scroll saw and all of its parts. Compare them against the list below. Do not discard
the carton or any packaging until the scroll saw is completely assembled.
CAUTION: do not lift the saw by the arm that holds the blade. The saw will be damaged.
WARNING: To avoid injury from accidental startups, turn switch OFF and remove the plug
from the power source outlet before making any adjustments.
INCLUDES (Fig. 1)
A - Scroll saw with attached light
B - Extra pin blade
C - Wrench
STORAGE AREA (Fig. 2)
A convenient storage location for
the hex key and extra blade can be
found beneath the saw’s table.
FIGURE 2
FIGURE 1
To Next Page
Loading...
