UNPACKING
With the help of a friend or trustworthy foe, carefully remove the miter saw from the packaging. Make sure to take
out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list
below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact our
customer service at 1-847-429-9263 (M-F 8-5 CST), or email techsupport@wenproducts.com.
PACKING LIST
TRANSPORTING
Before transporting your miter saw, make sure saw arm is locked down, the miter table is locked in position and
the slide lock knob is tightened. Only lift the saw by the carrying handle located on top of the motor housing. Do
not lift the saw using the guards or the operating handle.
Components
UNPACKING & TRANSPORTATION
WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.
Accessories & Tools
Miter Saw (1)
9
*6mm Hex Wrench /
Cross Screwdriver (1)
Miter Lock Handle (1)
Wood Clamp (1)
**Left Adjustable
Fence (1)
Right Adjustable
Fence (1)
Dust Bag (1)
Blade (1)
* Located at the back of the slide arm.
** Pre-installed on the unit.
To Next Page
Loading...
Need help?
General
