Wen TT0811

8.25" BENCHTOP
TABLE SAW
Instruction Manual
MODEL TT0811
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM
1-800-232-1195 (M-F 8AM-5PM CST)
For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM

Wen TT0811 Specifications

General

Brand	Wen
Model	TT0811
Category	Saw
Language	English

Summary

GENERAL SAFETY RULES

WORK AREA SAFETY

Guidelines for maintaining a clean, safe workspace and keeping others away.

ELECTRICAL SAFETY

Rules regarding power cords, grounding, and avoiding wet conditions.

POWER TOOL USE AND CARE

Instructions on using the tool correctly, maintenance, and securing workpieces.

SPECIFIC RULES FOR YOUR TABLE SAW

SAW BLADE SAFETY

Precautions for handling and using saw blades correctly.

PERSONAL SAFETY

Specific safety advice for table saw operation, including PPE and pacemaker considerations.

TABLE SAW SAFETY

Rules for safe operation, workpiece handling, and guard usage.

ELECTRICAL INFORMATION

UNPACKING & PACKING LIST

ASSEMBLY & ADJUSTMENTS

INSTALLING THE BLADE GUARD

Step-by-step instructions for installing the blade guard.

POSITIONING THE RIVING KNIFE

Instructions on how to correctly position the riving knife for safety.

CHANGING THE BLADE DEPTH

How to set the correct blade depth for different cuts.

CHANGING THE BLADE ANGLE

Instructions for adjusting the blade angle for bevel cuts.

REPLACING THE BLADE

INSTALLING A STANDARD BLADE

OPERATION

ONOFF SWITCH

PUSH STICK

USING THE MITER GAUGE

MAKING A RIP CUT

MAKING A MITER CUT

MAKING A BEVEL CROSS CUT

MAKING A COMPOUND (BEVEL & MITER) CUT

MAINTENANCE

ROUTINE INSPECTION

F STATEMENT