10
INSTALLING DRAPERY ENCLOSURES
Draperies are often used to close off the lower portion of the stage, for better appearance. They can be
attached to the stage even where stairways or back/side rails are used.
The draperies are secured to the stage using plastic clips fitted with a hook tab that connects to a loop
fastener on the drapery.
Drapery enclosures must be attached after guard rails are installed, and before stairways.
To attach the draperies:
1. Install clips along the stage perimeter wherever drapery is desired (about 12" apart).
2. Beginning at a corner of the stage, press the drapery onto the clips.
3. Continue attaching the drapery to the clips until the section is completely installed.
4. Repeat the above procedure with the remaining drapery sections.
To Next Page
Loading...