Using Calculator
Calculator mode
Select Calculator Option by Pressing Key in home screen.
Panel will display.
Enter the quantity and press the ENTER key.
Panel will display.
Enter the rate and Press the ENTER
Panel will display
QTY: _ .
RATE:_
QTY :
TOTAL : 10:00
Press the PRINT to print the calculator report or enter the qty to go to the next entry.
•
•
•
•
•
•
• Please read the user manual before using the Product.
• Ensure that the Neutral-Earth voltage is less than 3 Volts AC. Improper grounding may
lead to Power Adaptor & Logic Card failure.
10.0 DO'S & DON'TS
10.1 Do's
10.2 Don'ts
• Don't keep the Product near sources of electrical interference like loud
speakers, cordless phones, etc., which might induce noise on your
equipment.
• Don't connect your Product to the same outlets of those of large motors.
• Don't connect your Product to output power in case of power fluctuation,
use a Voltage Stabilizer to connect your Product.
• Don’t keep the serial interface cable connected, once the download
operation is complete.
• Don’t touch the LCD screen with bare hands, It may lead to stains on
LCD.
• Don’t subject the keypad to any kind of oil or liquid.
• Ensure Paper Cover & keypad module is fixed in place.
• Ensure power adapter cable is fully inserted in to the connector.
• Please keep the packing material carefully and use it whenever you have to transport
the Product.
• Ensure that the Product is cleaned daily and preventive maintenance is done
periodically to enhance the life of your Product.
• Product
• Use good quality of thermal paper for printing.
• Only use the power cord supplied along with the product.
• When connecting or disconnecting the plug, always hold the plug and not the cord.
•
Use a Soft dry cloth to clean your .
Always use genuine WeP spare parts only.
27
↓
•
To Next Page
Loading...
