13.0 TECHNICAL SPECIFICATIONS
PRINT
Printing method Thermal line dot method
Printing Speed 50 mm/sec
Resolution 203 DPI
Character Size Small Font: 12 x 25 dots
(W x H dots) Big Font: 16 x 30 dots
Printing width 48 mm
Printing Characters per line Small Font: 32 Characters
Big Font: 24 Characters
PAPER
Paper Path Curved paper path
Paper Width 58 (+,-1)mm
Paper Roll Diameter 75mm - Max.
Paper loading method Manual.
Paper Roll internal diameter 12-13mm
Paper thickness 60 - 100 uM
Paper type Thermal roll paper.
Std. I/F supported
USB device & Host
ELECTRICAL
Operating voltage range(V) 150 - 270V
Frequency Range 47 - 53 Hz
Rated Current (A) ~0.318A
KEY PAD MODULE:
Display 16 x 2 Chars. LCD
Key Board 16 keys
RELIABILITY
Thermal head
Electrical life : 100 million pulses/dot
Thermal head Wear life : Paper feed length, 50 km
(printing rate 25% max)
Platen open life : More than 5000 times (Regarding
opening and closing as one time)
Photo interpreter life : 12000 hours (Electrified time)
with the recommended circuit
SENSOR/SWITCH: Paper end sensor.
Thermistor for temperature control.
Micro switch for Platen open.
DIMENSIONS (LxWxH):242 x 143 x 132 (mm)
TEMPERATURE
0 0
Operation 0C to 50C
0 0
Storage - 20C to + 60C
HUMIDITY
Operation 20% to 85% (Non condensing)
Storage 5% to 95%
1100 Items in Database
Complete bill storage for
current day & previous day
Maximum 255 items per bill Bill
storage per day - 1000 nos. or
till memory gets full
Storage Capacity
30
To Next Page
Loading...
