WerkMaster Cobra - Introduction; Machine Descriptions; Cobra Model; Python Model

OPERATOR’S)MANUAL))
Page!2!)
INTRODUCTION))
Congratulations on your purchase of a WerkMaster machine. WerkMaster
machines allow professional surface prep, polishing, grinding, edging, buffing
and restoration of virtually any surface material, including concrete, terrazzo,
stone, and hardwood. This manual is provided to assist you in the operation and
maintenance of your WerkMaster.
!
MACHINE DESCRIPTIONS
WerkMaster machines include the SCARAB, RASP, THE EDGE, THE BOSS,
MIROIR, COBRA, PYTHON, RAZOR, TITAN XT, COLOSSOS XTX and
MAGNUM XTX models. To see the complete family of WerkMaster machines visit
our website at www.werkmaster.com.
!
COBRA
• Aggressive and powerful surface prep and polish machine, designed to
meet the needs of today’s general contractors, facility maintenance
contractors and equipment rentals
• 7 Machines in 1 – grinds, sands, strips, polishes, buffs, burnishes, and
edges
• Use for concrete floor prep and polish, as an edger on large commercial
and industrial jobs, or for retail and small commercial polishing and surface
Remove thinset, epoxy, glue, paint and mastic on concrete; works on
spalled and rained out concrete
• Run wet or dry
• Edge to within 1/8” (3 mm) of the wall
• Has an adjustable, foldable handle for easy transport
• Features WerkMaster Multi-Disc technology with 6 counter-rotating heads
and the versatility of using our 6” (152mm) ULTRA-FLEX Plug ‘N Go
tooling system
• Features auto sensing dual phase variable frequency drive that lets you run
at speeds from 450 to 1160 RPM
• Run on 220V 1 or 3 phase; can also be run on two 110V outlets using
WerkMaster’s Quick 220 kit (sold separately)
• Change the tooling and the COBRA can be used on hardwood, stone and
terrazzo
PYTHON
• Aggressive and powerful surface prep and polish machine, designed to
meet the needs of today’s general contactor, facility maintenance
contractors and equipment rentals
• 7 Machines in 1 – grinds, sands, strips, polishes, buffs, burnishes, and
edges
• Features a large capacity Water Tank ideal for refinishing and polishing
soft stone (marble), hard stone (granite) and terrazzo
• Remove thinset, epoxy, glue, paint and mastic on stone, terrazzo and vinyl
flooring
• Run wet or dry
• Edge to within 1/8” (3 mm) of the wall