Westerbeke 6.5KW - Page 64

38. Rocker cover.
39. Oil manifold tee, oil pressure sender and switch.
40. Fresh water pump.
41. Bellhousing.
42. Ignition coil and bracket.
43. Intake manifold.
Tightening torque: 1.9 2.6 kg-m (14 - 19 lb-ft)
44. Carburetor and fuel pump.
45. Alternator and bracket.
46. Governor.
47. Sea water pump.
48. Starter motor and circuit breaker.
49. Heat exchanger and related hoses.
50. Exhaust manifold assembly and related hoses.
Tightening torque:
1.9 - 2.3
kg-m
(14 -
17
lb-ft)
51.
Armature and drive disc assembly.
Tightening
torque.:
Drive disc to
armature:
6.9 -
7.6
kg-m
(50 -
55
lb-ft)
Drive
disc
to flywheel:
2.5 -
2.8 kg-m
(18 -
20
lb-ft)
52. Generator housing.
NOTE: Be sure bear ing seats properly and that the bear ing lock
pin is in place.
53. Exhaust screen.
54. Generator brushes.
55. Generator fan.
Tightening torque: 3.5 kg-m (25 lb-ft)
56. Generator fan cover.
57. Mounts and rails.
58. Control panel and wiring harness.
58