CONFIGURING SETTINGS
69
WD CLOUD USER MANUAL
SSH Select this option to securely access your WD Cloud device and
perform command-line operations via the Secured Shell (SSH)
protocol. SSH is disabled by default.
1. To enable/disable SSH, click the toggle button.
2. Check “I accept” to indicate that you’ve read the
warning shown below.
WARNING! Please note that modifying or attempting to modify
this device outside the normal operation of the
product voids your WD warranty.
3. Enter a new password (twice for validation).
4. Click
Next.
Note: The SSH user name is set to sshd by default and cannot be
changed
.
To Next Page
Loading...
