Western Digital wd Cloud - Viewing Backup Details; Modifying a Backup Job; Deleting a Backup Job; Camera Backups

BACKING UP AND RETRIEVING FILES
50
WD CLOUD USER MANUAL
Viewing Backup Details
Use the following steps to view the details of a USB, Remote, and Internal Backup job.
1. On the Internal Backups screen, select either USB, Remote, or Internal Backups, if not
already selected.
2. In the Backup Job/Backup Queue section, select the job you’d like to view, then click
the Job Details icon.
3. Review the details of your Backup job, then click Close.
Modifying a Backup Job
Use the following steps to modify a USB, Remote, or Internal Backup job.
1. On the Internal Backups screen, select either USB, Remote, or Internal Backups, if not
already selected.
2. In the Backup job/Backup Queue section, select the job you’d like to modify, then click
the Modify Job icon.
3. On the Modify dialog, make the necessary changes to your job, then click Save.
Deleting a Backup Job
Use the following steps to delete a USB, Remote, or Internal Backup job.
1. On the Internal Backups screen, select either USB, Remote, or Internal Backups, if not
already selected.
2. In the Backup job/Backup Queue, select the job you’d like to delete, then click the
Delete Job icon.
3. In response to the confirmation message, click OK. The selected Backup job is now
deleted and removed from the Backup Jobs list.
Camera Backups
Camera backups allow you to backup the data on your camera to the WD Cloud device.
Once downloaded, users can navigate to the location where the camera data was saved to
access the data, if they have access to that share.
Creating a Camera Backup
Use the following steps to back up your camera to the WD Cloud device.
1. Ensure that your camera is connected to your WD Cloud device.
2. On the Navigation bar, click Backups to display the Backups screen.