WFCO WF-5300 Series User Manual

MODEL WF-5318 WF-5320
Inverter
Waveform
Output Voltage
Output Current 15.7 A 17.4 A
Continuous Output Power 1800 W 2000 W
Surge Power, 2 sec. 3600 W 4000 W
Output Frequency
Output THD, resistive load
Input Voltage Range
Input Current (no load), 12 Vdc input
Input Current (full load), 12 Vdc input 180 A 200 A
Peak Efficiency
Transfer Switch
Transfer Time
Ac Pass-Through Rating
Switch to Shore Power
Switch to Inverter
Remote Control Panel
Control Functions
Display Functions
Protection
Output Circuit Breaker
Overload
Short Circuit
Over Temperature
Battery Reverse Polarity
Safety Listing
Connectors
Dc Input
Ac Input and Output
Ground
Remote Control Panel Connector Type
Remote Control Panel Cable Length 20 ft (6 m) 30 ft (9 m)
Mechanical/Environment
Dimensions (LxWxH)
Weight
Cooling
Unit Installation
Operating Environment
14 °F to 104 °F and 20% to 90% RH Non-condensing
SPECIFICATIONS
Screw Clamp for up to 2 AWG wire
12.3 (13.6) x 9.5 (10.7) x 4 inches
11.5 lb
Allow at least 2 cubic feet of air around unit with 3 inches
of space at each end for air flow.
Bottom or side panel facing downward
Auto shutdown
Auto shutdown, one auto recovery during operation
No damage
UL 458
Bolts for Ring Lugs Size M8/1.25, 13mm hex nuts
Lever connectors for up to 10 AWG wire
Sine Wave
115 V ac ±3%
60 Hz ±0.3 Hz
< 4%
10.0 - 16.0 V dc
< 90 Vac or > 140 Vac
Ac Output Voltage, Current, Power
6P6C (RJ-25)
< 1.6 amps
> 90%
Ac Input/Standby/Invert Status
Protect/Fault Diagnostics
30 A
Auto shutdown, auto recovery
< 20 ms
24.8 amps
> 80 Vac or < 130 Vac
Dc Input Voltage, Current, Power
Inverter Start/Stop
Display Select
8

WFCO WF-5300 Series Specifications

General

Brand	WFCO
Model	WF-5300 Series
Category	Inverter
Language	English