Issue 2.0
4850 / 4860 Master Clock
Operating and Installation Instructions
2-2
5 - Connecting third-party equipment using EBU and IRIG.
For further information on
connecting a 4862 /
4850.x.E Master Clock to
other equipment using
EBU timecode see pages
11-1 and 11-2.
For further information on
connecting a 4861 / 4850.x.I
Master Clock to other
equipment using IRIG
timecode see page 10-1.
8 - Apply power and set time on 4850 / 4860.
See page 3-1 for information
on connecting the 4850 /
4860 to the mains power
system. See pages 2-4, 2-5
and 2-6 for information on
programming the time.
6 - Connecting the 4860net to an Ethernet network.
7 - Connecting Impulse slave clocks.
For further information on
connecting a 4860net Master
Clock to an Ethernet network
see chapter 9.
For further information on
connecting a 4860.IMP
Master Clock to Impulse
slave clocks see chapter 12.
To Next Page
Loading...
