EasyManua.ls Logo

Wheaton UniSpense PRO - Fuse Replacement; Fuse Replacement Steps; Fuse Type and Rating Information

Wheaton UniSpense PRO
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WHEATON UniSpense
®
PRO Peristaltic Pump
WHEATON | 800.225.1437 (U.S. & Canada Only) | 856.825.1100 | www.wheatonsci.com| P/N 50099073 Rev. 2/2/10 Lit. No.8734
20
14.3 Fuse Replacement
DANGER! BE CERTAIN THE UNIT IS DISCONNECTED FROM THE AC POWER
SOURCE.
1. Disconnect the cord-set from the AC power source.
2. Remove the fuse drawer by using a small flat screwdriver to lift
the tab.
3. Replace with new fuses:
108 - 120 vac unit use (2) 5x20mm, 250V, 2.0 AT fuses, be sure the correct cord set is used.
220-240 vac unit use (2) 5x20 mm 240V 1.0 AT fuses, be sure the correct cord set is used.
15.0 Illustrations and Diagrams

Related product manuals