11
TRANSPORT AND HANDLING
Never lift the washer-dryer by holding it at the worktop.
1. Pull out the mains plug, and close the water tap.
2. Make sure that door and detergent dispenser are properly
closed.
3. Disconnect the inlet hose from the water tap, and remove
the drain hose from your draining point. Remove all rest
damaged during transport.
4.
removing the transport bolts in the “INSTALLATION GUIDE”
in reverse order.
Important: Do not transport the washer-dryer without
1. See if you can solve the problem by yourself with the help
of the suggestions given in the TROUBLESHOOTING
2.
fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL
OCCURS, GET IN TOUCH WITH THE NEAREST
To receive assistance, call the number shown on the warranty
booklet or follow the instructions on the website
www.whirlpool.com.hk
When contacting our After-Sales Service, always specify:
• a brief description of the fault;
• the type and exact model of the appliance;
xxxxxxxxxxxx
• the service number (number after the word Service on the
rating plate);
•
your full address;
• your telephone number.
If any repairs are required, please contact an authorised After-
Sales Service (to guarantee that original spare parts will be
used and repairs carried out correctly).
To Next Page
Loading...
