7
At this point, follow the instructions provided for a “Drying only” cycle.
Repeat this procedure for the remainder of the load. Note: a cooling-down
period is always added to the end of each drying cycle.
Drying only
Press button “Dry only” to perform the drying-only cycle. After selecting
the desired cycle (compatible with the type of garments), press button
“Dry only” to exclude the washing phase and start the drying phase at the
maximum level for the selected cycle. The drying level or t
ime may be set
and changed by pressing the drying button “Drying settings”.
CHILD LOCK
To lock the control panel, press and hold the button “Dry only” for
approximately 3 seconds. the symbol
lights on the display to indicate
that the control panel is locked (with the exception of the
button). This
prevents unintentional changes to programmes, especially with children
near the machine.
If any attempt is made to use the control panel, the symbol
the display.
To unlock the control panel, press and hold the button “Dry only” for
approximately 3 seconds.
TIPS AND SUGGESTIONS
Divide the laundry according to:
hand-washed). Colour (separate coloured garments from whites, wash
new coloured garments separately). Delicates (small garments – such as
nylon stockings – and items with hooks – such as bras: insert them in a
fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washer-dryer and
the drum. Check all buttons.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washer-dryer
clean the washer-dryer.
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washer-dryer and help to prevent leaks.
Unplug the washer-dryer when cleaning it and during all maintenance work.
Clean the washer-dryer
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water. Do not use solvents or
abrasives.
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant
odours from forming.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every spin and
to distribute the load in a uniform manner, the drum rotates continuously
at a speed which is slightly greater than the washing rotation speed. If,
after several attempts, the load is not balanced correctly, the machine
spins at a reduced spin speed. If the l
oad is excessively unbalanced, the
washer-dryer performs the distribution process instead of spinning. To
encourage improved load distribution and balance, we recommend small
and large garments are mixed in the load.
To Next Page
Loading...
