Need help?Do you have a question about the Whirlpool WFC7500VW0 and is the answer not in the manual?
General| Style | Front-Loading |
|---|---|
| Color | White |
| Washer Capacity | 2.3 cu ft |
| Dryer Capactity | - |
| Max Spin Speed | 1200 RPM |
| Spin Speeds | 2 |
| Spin Class | B |
| Number of Cycles | 11 |
| Cycle Selections | Spin + Drain |
| Wash | Silk |
| Options | - |
| Hours | - |
| Noise level | - |
| Temperature Selections | Tap Cold (All Cold Rinses) |
| Energy Class | - |
| Annual Energy Consumption | 64 kWh |
| Annual Water Consumption | - |
| Water Consumption Per Cycle | - |
| Voltage | 120V |
| Frequency | 60Hz |
| Current | 15 A |
Weight and Dimensions| Depth | 33 1/2 in |
|---|---|
| Height | 33 1/2 in |
| Width | 23 1/2 in |
| Net Weight | - |
Explains the safety alert symbol, DANGER, and WARNING messages.
Lists the necessary tools and parts for installation.
Specifies required clearances for proper installation and operation.
Details requirements for standpipe drain installation.
Explains installation for laundry tub drainage.
Outlines requirements for floor drain installation.
Warns about electrical shock hazards during installation and use.
Provides essential grounding instructions for safety.
Guides on removing shipping bolts and securing the unit.
Details how to connect the water inlet hoses.
Lists final checks before operating the washer.
Warns about fire hazards associated with flammable materials.
Step-by-step guide to clean the door seal.
Procedure for thorough internal cleaning of the washer.
Lists and explains error codes displayed by the washer.
Troubleshooting for power-up issues.
Addresses issues related to noise, vibration, and imbalance.
Troubleshooting for failure to start a cycle.
Troubleshooting for a washer that won't shut off.
Troubleshooting for control input issues.
Troubleshooting for dispenser issues.
Troubleshooting for issues with filling.
Troubleshooting for washer overfilling.
Troubleshooting for drum rotation problems.
Common causes and checks for washer leaks.
Troubleshooting steps for a door that won't unlock.
Diagnoses common issues with starting, filling, or stopping.
Checks for proper drain hose setup and height.
Addresses problems with draining or spinning.
Tests for the cold and bleach water inlet valve solenoids.
Procedures for testing the pressure switch.
Tests for the line filter.
Tests for the door switch and lock solenoids.
General guide for performing diagnostics before servicing.
Explains the A09 error code for water intake issues.
Explains the A10 error code for long drain times.
Instructions for starting and using the Universal Diagnostic Test.
Instructions for starting and using the Quick Diagnostic Test.
Details test displays, control actions, and failure codes.
Steps to initiate the Quick Diagnostics Test.
To Next Page