2-1
INSTALLATION INFORMATION
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before
starting installation. The parts supplied are in
the washer drum.
Tools needed for connecting the water in-
let hoses
Pliers (that open to 1-9/16• ˝ [39.5 mm])
Flashlight (optional)•
Tools needed for installation
Open end wrenches 13 mm and 12 mm•
Level•
Wood block•
Ruler or measuring tape•
Parts supplied
OPTIONS
Pedestal
You have the option of purchasing pedestals
of different heights separately for this wash-
er. You may select a 11˝ (30.0 cm) pedestal.
The pedestal will add to the total height of the
washer.
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
D. Beaded tie strap
ABC
D
If Yo u Have Yo u Will Need to Buy
Laundry tub or
standpipe taller
than 55" (1.4 m)
Sump pump system (if not already
available)
Overhead sewer Standard 20 gal. (76 L), 30" (76.2cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain Siphon break, Part Number 285834;
additional drain hose
Part Number8318155; a nd connector kit,
Part Number285835
Drain hose too
short
4ft (1.2 m) drain hose extension kit,
Part Number 285863
Water faucets
beyond reach of ll
hoses
2 longer water ll hoses:
6ft (1.8m) Part Number 76314
10 ft (3.0 m) PartNumber350008
Alternate parts
Pedestal
Height
Approximate
Height with
Washer
ColorModel
Number
11.8" (30.0cm) 44.7" (113.5 cm)White LAB0050PQ