Customer Service - 1.800.343.9463
Page 3
By measuring the temperature of the liquid, the
temperature reading will be consistent and the unit
will only run when it needs to.
To install the thermostat:
1. Fill an empty wine bottle to its neck with room
temperature water.
2. Press bottle probe securely into bottle
3. Place the bottle with probe into a level rack
space.
Avoid pulling too much on the probe cord as it
may become disconnected, which would lead to
inaccurate temperature readings.
The WhisperKOOL system is based on the temperature of the wine (It is ideal to place the probed
bottle lower in the racking, so that it is not near cold supply air). Do not be misled by ambient
temperatures that are read from the outside of the cabinet. The air temperature in the cabinet will
be cooler than the liquid temperature of the wine while it’s coming to optimum balanced temperature.
LIQUID MEASURING THERMOMETER
To Next Page
Loading...
Need help?
General
