Trouble Shooting (cont.)
36
PROBLEM CAUSE(S) SOLUTIONS
Stove has optional
FASTFIRE™ Self-Igniter, but
igniter probe does not heat up
(glow red) and ignite pellets.
Ash or pellet dust is blocking the
end of the igniter tube.
No power to probe.
Clean igniter tube.
Check to see that the power cord is
plugged in. Contact your authorized
whitfield dealer if this is not the
source of the problem.
With optional FASTFIRE™
Self-Igniter, pellets do not
ignite within 15 minute timer
cycle; igniter probe glows red.
To Next Page
Loading...
