To Next PageTo Next Page
Need help?Do you have a question about the Whitfield ADVANTAGE PLUS and is the answer not in the manual?
Crucial warnings about fire prevention, proper operation, and potential hazards.
Specifics on fuel, cleaning, operation limits, flammables, ashes, power, and soot.
Details independent safety listings and the location of the safety label.
Approved fuels, ash limits, clinkering, and feed rate considerations.
Advice on ash removal frequency and how pellet size affects feed.
Explanation of all control panel buttons, switches, and indicators.
Procedures for setting and optimizing the damper for freestanding and insert models.
Guidance on the initial break-in period for the stove's components.
Guides for lighting, starting, and safely turning off the stove.
Factors affecting flame appearance, pellet suitability, and burn times.
How the stove reacts to power outages, overheating, and other safety conditions.
Steps to connect a thermostat for temperature-controlled operation.
Essential steps and recommendations before and during installation.
Unpacking and initial assembly steps for the stove.
Specifies non-combustible floor pad requirements and safe distances from walls.
Guidelines for exhaust system setup, including general rules and insert specifics.
Specifics for venting inserts into existing chimneys or using flexible pipe.
Method for calculating equivalent vent pipe length for proper system sizing.
Step-by-step instructions for horizontal exhaust setup.
Detailed physical measurements and diagrams of the stove.
Illustrates common horizontal vent layouts and required clearances.
Diagrams and descriptions of various vertical and horizontal venting methods.
Specific safety and installation requirements for mobile home environments.
Instructions for connecting inserts to masonry or factory-built chimneys.
Procedures for framing and installing an insert directly into a wall structure.
Guidance on inspecting and cleaning the burn grate, ash pan, and slide plates.
Details inspection of door gasket, exhaust passages, motors, and window cleaning.
Solutions for problems like flame issues, shutdowns, and blower malfunctions.
Information on available decorative and functional accessories.
Dimensions for shroud panels used with insert models.
Details the manufacturer's limited warranty terms and claim process.
Part numbers for common and freestanding model components.
Part numbers for components specific to the insert model.
General| Brand | Whitfield |
|---|---|
| Model | ADVANTAGE PLUS |
| Category | Pellet stove |
| Language | English |
