Whynter ARC-12SD User Manual

11 | P a g e
AIR FILTERS INSTALLATION
Your Whynter portable air conditioner is equipped with a washable Pre-Filter and an Activated
Carbon Filter. The washable Pre-Filter removes large particles such as dust, pet hair and
dander. The Activated Carbon Filter which is designed to remove smoke and other odors. It is
recommended you replace the Activated Carbon Filter every 2-3 months or as needed. Follow
the steps below to install the filters.
WARNING: NEVER OPERATE THE AIR CONDITIONER WITHOUT THE PRE-FILTER
1. Pull up the pre-filter frame
2. Remove the Pre-Filter from the filter frame.
3. Place the Activated Carbon Filter on the Pre-Filter.
4. Reattached the filter frame.
5. Insert the assembled filter frame into the unit.

Whynter ARC-12SD Specifications

General

Type	portable
Color	platinum, silver
Operating Area Size	400 square feet
Cooling Settings	1
Seasonally Adjusted Cooling Capacity	4959 british thermal units
Heater	no
Moisture Removal	91 pints per day
Fan Speeds	3
Fan Airflow Rate	188 cubic feet per minute
Filter	carbon
Hose	single
Noise Level	53 decibels adjusted
Remote Control	yes
Wireless Connectivity	none
Timer	yes
Sleeping Mode	no
Control Type	touchpad
Energy Efficiency	11.11
Voltage	115
Current	9.5 amperes
Depth	15.5 inches
Height	31 inches
Width	17 inches
Net Weight	62 pounds