Whyte Kynamic RHeO 1 - Hardware

13
Whyte & Kynamic (RHEO 2 & 3 ONLY)
Thank you for choosing the new Kynamic powered RHeO from Whyte. The illustration above depicts the key Kynamic components equipped
with your e-Bike. Please note the products and specications stated in this manual may be updated without prior notication. This manual
includes instructions for the Kynamic KY-BC250 System, including the following components; Rear Hub Motor - In-tube Battery Set -
Torque Sensor - HMI - Battery Charger.
HARDWARE
1
2
54
3
1
2
5
4
3