18
WARNING! Do not exceed the minimum seat-post insertion details
indicated on the main body of the seat-tube. Failure to correctly
install and adjust your seat-post can lead to mechanical failure of
the post or frame. If there is any confusion regarding your seat-
post insertion markings please contact your Whyte dealer.
Do not use the seat-post if an oil leak is detected or if the system
needs to be bled. Your seat-post might be cable operated in
which case this does not apply. If the seat-post is compressed
and will not return to full extension, do not manually pull the seat-
post head up to extend.
INFO: Saddle angle and position can be adjusted to suit riders
preferred position. For guidance regarding rider adjustments
please consult the manufacturers manual.
WARNING! DO NOT attempt to adjust air pressure using the air
valve on the seat-post. Any change in the factory air pressure
setting will render the seat-post inoperable, requiring full service.
WARNING! Before every ride check and conrm the seat-post
does not slip in the frame. Check and conrm the saddle rails do
not slip in the seat-post clamp.
If tting or adjustment is required please consult the Seat-Post
manufacturers manuals. Follow the installation instructions closely! Pay
attention to specied torques and proper tools needed.
Do not exceed the minimum insertion line. This can cause the post and/or
your frame to fail.
If you are not comfortable with the installation, set-up or use of your
Seat-Post, please contact your local Whyte Bikes dealer or Whyte Bikes
directly.
For optimal performance and maximum life of your seat-post, be sure to
follow the maintenance schedule outlined by the manufacturer.
After a crash, accident or if you suspect possible damage, have the post
inspected by a professional bike mechanic.
SEAT POST & SADDLE
To Next Page
Loading...
