Kunststoffschweißtechnik
Contens
25.06.12 Working instructions WIDOS 4001 Page 4 of 59
1.
DESCRIPTION OF PRODUCT ...................................................................................... 6
1.1.
Mounting and purpose-oriented use ..................................................................................6
1.2.
Safety measures....................................................................................................................7
1.3.
Conformity .............................................................................................................................7
1.4.
Marking of product ...............................................................................................................7
1.4.1.
Technical data ................................................................................................................7
1.4.1.1.
WIDOS 4001 general data.......................................................................................7
1.4.1.2.
Heating element.........................................................................................................8
1.4.1.3.
Planer.........................................................................................................................8
1.4.1.4.
Hydraulic aggregate ...................................................................................................8
1.4.1.5.
Basic unit....................................................................................................................8
1.5.
Equipment and accessories: ...............................................................................................9
2.
SAFETY RULES .......................................................................................................... 10
2.1.
Explanation of the different symbols................................................................................10
2.2.
Obligations of the owner....................................................................................................11
2.3.
Obligations of the worker...................................................................................................11
2.4.
Measure of organization.....................................................................................................11
2.5.
Information about safety precautions...............................................................................11
2.6.
Instructions for the staff.....................................................................................................11
2.7.
Dangers while handling the machine................................................................................12
2.8.
Gefahren durch die Hydraulik............................................................................................12
2.9.
Special dangers...................................................................................................................12
2.9.1.
Danger of stumbling over hydraulic and electric cables ...............................................12
2.9.2.
Danger of being burned at the heating element and at the welding point ....................13
2.9.3.
Danger of clothes being grapped by the planer............................................................13
2.9.4.
Danger of crushing by clamping tools and guide rods .................................................13
2.9.5.
Risk of injury by noise...................................................................................................14
2.10.
Structural modifications on the machine .........................................................................14
2.11.
Warranty and liability..........................................................................................................14
3.
DESCRIPTION OF PROCESS .................................................................................... 15
4.
OPERATING AND INDICATING ELEMENTS.............................................................. 16
4.1.
Elements on the front side.................................................................................................16
4.2.
Elements on the right side .................................................................................................17
4.3.
Elements on the heating element......................................................................................18
4.4.
Wells at the table.................................................................................................................19
5.
STARTING AND OPERATING..................................................................................... 20
5.1.
Safety indications and Starting .........................................................................................20
5.2.
Welding process .................................................................................................................21
5.2.1.
Plane girder for planing only at one side ......................................................................23
To Next Page
Loading...
