Ku nst sto ffschwei ß tec hni k
Description of product Chapter 1
02.11.11 Working instructions WIDOS 4900 Page 8 of 46
Environment: - keep the workshop clean (especially the welding
area must be clean)
- If secured by an appropriate measurement that
allowed conditions for welding are indicated, it is
possible to work in any outside temperature
condition as far as the welder is not constrained in
its manual skill.
- avoid humidity, if necessary put up a tent
- avoid strong sun beams
- if it is windy shut the pipe endings.
1.5.1.2 Planer
Motor: monophase-alternating current-motor
Power: 1,05 kW
Voltage: 230 V (± 10 %)
Current: 4,5 A
Frequency: 50 Hz (± 10 %)
RPM n2 of planer approx. 60 revs/min.
Elements: Switch on / off with fixing device
Connecting cable and plug with earthing contact
Weight: approx. 14 kg
1.5.1.3 Heating element
Power: 2,1 kW
Voltage: 230 V (± 10 %)
Current: 10 A (± 10 %)
Frequency: 50 Hz
Outside-∅: 350 mm
Surface: Antistick-coated
Elements: Electronic temperature control
Control lamps, switch on / off
Connecting cable and plug with earthing contact
Weight: approx. 13 kg
To Next Page
Loading...
