widos 4900 - 11 Declaration of Conformity

Ku nst sto ffschwei ß tec hni k
WIDOS Einsteinstr. 5 Phone +49 7152 9939 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax +49 7152 9939 - 40
info @ widos.de www.widos.de
02.11.11 Working instructions WIDOS 4900 Page 46 of 46
11. Declaration of conformity
in the sense of the EC-guideline, EG-MRL 2006/42/EG
Corporation
WIDOS GmbH
Einsteinstr.5
D- 71254 Ditzingen- Heimerdingen
declares under own responsibility that the product
Plastic welding machine
WIDOS 4900
to which this declaration refers corresponds to the following norms and norming ducuments:
1. DIN EN ISO 12100 – 1 und 2 (replacement for DIN EN 292 part 1 and 2)
Safety of machines, basic terminology, gen. design guidelines
2. DIN EN 60204.1
Electric equipment of industrial machines
3. DIN EN 4413
Safety technology requirements at fluid technical devices and components
4. EN 60555, EN 50082, EN 55014
Electro-magnetic resistence
The technical documentation is completely available.
The above-mentioned company will provide the following technical documentation for inspection:
- test certificate
- other technical documentation
Ditzingen - Heimerdingen, the 02.11.11
Marting Dommer (Technical director)