WIKA SENSeOR AMS01 - Unpacking; DIN Rail Mounting

MONITORING SOLUTION ENERGY
SENSeOR AMS01 User Manual 13/29
www.senseor.com
1.5 UNPACKING
1.5.1 PHYSICAL DIMENSIONS
Unit in mm.
1.6 DIN RAIL MOUNTING
CAUTION
ENSURE THAT THE LOW-LEVEL COMPARTMENT WHERE THE READER IS MOUNTED IS SUFFICIENTLY
VENTILATED TO PREVENT OVERHEATING.
THE DEVICE MUST BE ELECTRICALLY GROUNDED FOR EMC COMPLIANCE.
The reader is designed for installation on a grounded 35 mm DIN rail. The reader could be mounted in
two different position to facilitate integration. SENSeOR recommends to mount the device vertically
with antennas output to the top.
Figure 5: Reader dimensions views
Figure 6: Front and side DIN rail fixation views