EN
14139245.01 12/2015 EN/DE
WIKA operating instructions model T1514
5.3 Grounding
WARNING!
Prevention of electrostatic discharge
When working during a running process operation, measures to prevent
electrostatic discharge from the connection terminals should be taken, as a
discharge could lead to temporary corruption of the measured value.
▶
Only use model T15.H temperature transmitters in grounded thermometer
heads!
▶
Connection of a resistance sensor (e.g. Pt100) to the T15.R with a
shielded cable. The shield must be electrically connected to the case of
the grounded thermometer.
Connection head BSZ
grounded
Loop cable
Only use the model T15
temperature transmitter in
grounded thermometers!
5. Commissioning, operation
To Next Page
Loading...
