You can set QoS mode of port.
TCP/UDP > TP TPS/DS > 802.1P > Physical port
1. “TCP/UDP Port” – Q1 ~ Q4 options are effective for the selected physical port only.
“Drop” option is the global setting for all physical ports.
The packet queue is transferred based on the number of “4 Queue WRR” on QoS Setting:
Priority Mode.
**WRR –Q1/Q2/Q3/Q4
**“Drop” - packets are dropped.
2. “IP TOS/DS” – “Priority Setting”: Q1 ~ Q4; “IP TOS/DS Port Setting” - It means the packets with
special IP are firstly transmitted.
3. “802.1p” – Priority mapping table as the screen shows.
4. “Physical port” - you can select the port that you want to configure as Q1~Q4 priority.
5. Click on “Update” to confirm and finish the setting.
The setting of “Class of Service” is finished.
Wildix WS08POE User Manual 22
To Next Page
Loading...