6. Danger if the boiler is heated without enough
water! Always ensure that there is enough water in
the boiler of the steam engine. Caution: When
refilling WiTabs dry fuel tablets also refill up to the
max. level.. The water must always be visible at
least at the lower end of the sight glass, otherwise
the joints become leaking and the boiler will be destroyed. Any
resulting claim, damage or consequential damage cannot be accepted.
7. If the boiler or any steam leading part leak, stop the steam model
immediately by removing the burner slide. Any necessary repair
should be carried out by authorized staff or at the WILESCO
company.
8. The steam engine meets all safety standards and actual regulations.
Every boiler has been submitted to a bursting pressure and water test
of 5 bar. The operating pressure is maximally 1,5 bar.
9. Imperatively keep the operating instructions together with your steam
box.
10. We advise you to place the stationary steameEngine on a non sliding
surface or fix it onto a coated chipboard (approx. 16 mm thick) with 4
wooden screws (3,4 x 45 mm). The size of the board depends on how
many models will be running with the steam engine.
To Next Page
Loading...
Need help?
General
