4.4 Warranty:
All WILESCO Steam Engines are carefully checked before leaving the
factory. However if a problem arises, you can return the Steam Engine to a
specialized distributor or directly to WILESCO. We are sure you will
understand that already fired or used models cannot be exchanged for new
ones. The most frequent claims are leaking boilers. The solder will be
destroyed if your Steam Engine runs without enough water in the boiler. In
such cases, the solder liquefy drop-shaped and the boiler leaks. This is an
obvious proof that the boiler was fired without enough water. Please watch
always carefully the water level, because the heating without enough water
excludes any demand for warranty.
This Steam Engine is only designed for the above described function.
Technical data can be amended without prior notice.
WILESCO wishes you lots of fun with your steam engine and
„full steam ahead“!
Wilhelm Schröder GmbH & Co. KG
D-58511 LÜDENSCHEID Schützenstraße 12
phone : +49 - 2351 - 9847-0 e-mail : info@wilesco.de
To Next Page
Loading...
