Wilks Enterprise Inc InfraRan Instruction Manual
11
LOCATION Input site location names for the log report with the
data entry keypad.
Multiple locations can be entered by pressing the
up or down arrow keys.
Pressing ENTER at any of the location numbers exits the
location entry menu.
ESCAPE Returns to prior menu.
Note: Defined locations cannot be changed unless the current file is empty.
See section 5.3 for erase functions.
7.2.3 Run Menu:
LOG ON Toggles logging operations, LOG ON indicates that the logging
operation is currently off. Pressing LOG ON will change the softkey
to LOG OFF and display a LOG ON indication on the top left
of the display.
Pressing the LOG OFF softkey toggles the logging functions off
and turns off the LOG ON indicator on the display.
See section 5.4.4 for additional logging functions.
CONTROL Toggles pump and alarm on/off conditions. ( note : the pump and
alarm functions are toggled on/off for the current run. Starting a
new run resets these functions to their normal defaults as set
in section 5.7 ).
Displays battery condition at time of key press.
See section 7 for display mode definitions on display alarms.
To Next Page
Loading...
