Wilks Enterprise Inc InfraRan Instruction Manual
15
7.4.4 Log Menu :
STATUS Global selection to turn logging function on/off.
Selectable log interval, 1 second to 1 minute using on
keypad.
MODE Select Continuous or Single logging mode.
INTERVAL Selectable by on keypad from 1 second to 1 minute.
ESCAPE Returns to prior menu.
Note : The analyzer does not average readings over the time period set in
interval. Instead the analyzer will take a snapshot of the concentration
displayed at the interval set point.
7.5 Calibrate Menu :
EDIT Step thru calibration values with the ENTER key on the keypad.
To change values, press CLEAR to erase current value and
enter new values thru the alpha numeric keypad. Press ENTER
to accept the new values.
To Next Page
Loading...
