wilks InfraRan - Specifications

Wilks Enterprise Inc InfraRan Instruction Manual
29
19.0 Specifications :
ITEM SPECIFICATION
Power Requirements (Battery Charger –
External Operating Supply)
100 – 250V AC 50/60 Hz
Battery Pack Rechargable, Nickel Metal
Hydride
12V, 9 Amp-hr capacity
Dimensions cm (inches) 38.1 cm(15”) x 18.5 cm(7.3”) x
19.1 cm(7.5”)
Weight kg (lb) 8.2 kg (18 lb)
Enclosure
High Impact Polymer
Type Single Beam Infrared
Spectrophotometer
Optics
Cell:
Photometer: Fixed Band Pass
Filter Pyroelectric Detector
Cell Pathlength
Sample Cell Volume 18.1 cm
3
Sample Flow
Gas Purge 5 cell volumes for 99% gas
exchange
Measurement Cycle Display updated every 1.5 sec
Source
Pulsed thin-film element
Communications RS-232, DB 9 connector
Communications protocol 9600 baud, 8,N,1
Concentration Alarm Two-level settable audible alarm
Display
256x64 pixel
Vacuum Fluorescent Display
Key Pad 20 Key Tactile Keypad
Operating and Storage Conditions
OPTIMUM NORMAL STORAGE
Temper atu re
23±2°C (73±4°F)
5 to 40°C
(40 to 120°F)
-20 to +60°C (-5
to 140°F)
Relative
Humidity
50±10%
5 to 95%
condensing
0 to 100%
non
non
-
-
condensing
Polished aluminum tube
or gold mirror multiple pass.
USB, Mini B connector
16 cm or 6.0 meters ( dependent
on gas and concentration range
being measured )
3 L/min Typical (16 cm cell)
10 L/min Typical ( 6.0 m cell)
and visual display alarms
.45 liters (6.5 m)
(16 cm)