Wilson Electronics WeBoost Drive Reach Flex Fleet User Manual

8
Connect the cable from the Outside Antenna
to the port labeled “Outside Antenna” on the
booster and connect the cable from the Inside
Antenna to the port labeled “Inside Antenna”
on the booster.
Note: If the hardwire power option was
implemented, booster will receive power only
when ignition is on.
STEP 4 Connect Coax Cables
to Booster
from Inside Antenna
from Outside Antenna

Wilson Electronics WeBoost Drive Reach Flex Fleet Specifications

General

Brand	Wilson Electronics
Model	WeBoost Drive Reach Flex Fleet
Category	Extender
Language	English