➢ “Black Line” is the thickness in each black line.
➢ Thickness offset means that the paper needs to be moved a
distance after each black line movement (This function is not
open).
Continuous：
➢ Continuous label type: Ignoring the gap and mark of label
➢ Stop Offset: The paper will be moved a distance after each
printing action stops (This function is not open).
➢ Stop On Last Element: Printing action will stop while printing the
last label
Sensor type:
➢ Use Current Printer Setting (by previous setting)
➢ Reflective sensor (Recommend)
➢ Transmissive sensor
Start Position Offset: (recommend to input number when the printing
position has a little bit shift up or shift down)
If selected, user can fill up how many dots to adjust the start printing
position.
To Next Page
Loading...