Winegard SK-1000 Instruction Manual

Remove wrap cable from rubber grommet on
electronics module.
Removing Elevation Motor Assembly
Remove the 4 screws holding the elevation
motor in place.
Remove the elevation motor and disconnect
cable from motor.
Replacing Wrap Cable
Remove 2 screws securing wrap cable to turret,
and remove wrap cable.
Install new wrap cable in place of the original,
and secure using the 2 screws
3
2
1
2
1

Winegard SK-1000 Specifications

General

Brand	Winegard
Model	SK-1000
Category	TV Antenna
Language	English