Winegard SK-1000 Instruction Manual

Reinstalling Elevation Motor and Electronics
Reconnect cable to elevation motor and reinstall.
Secure in place using the 4 screws.
Feed wrap cable through rubber grommet on
electronics
Using provided nut driver and 4 screws secure
electronics back in place.
Attach cables to electronics in the following order
from left to right.
• 12-pin connector
• 8-pin connector
• Male coax on wrap cable
• Male coax on included mini cable
1
2
3
4

Winegard SK-1000 Specifications

General

Brand	Winegard
Model	SK-1000
Category	TV Antenna
Language	English