WinGD WARTSILA RT-flex58T-E - Page 121

Maintenance
Group2
RT-flex58T-E
Winterthur Gas & Diesel Ltd.
1/ 1
 Cylinder Liner
− Measuring Bore Wear 2124−1/A1................................................
− Removal and Fitting 2124−2/A1..................................................
− Removing the Wear Ridge, Re-dressing Lubricating Grooves
and Scavenge Ports 2124−3/A1..................................................
Lubricating Quill with Pulse Jet
Lubrication: Removal and Fitting 2138−1/A2..............
Piston Rod Gland: Dismantling and Assembling, Measuring the Wear 2303−1/A1.........
 Cylinder Cover
− Removal and Fitting of Cylinder Cover and Water Guide Jacket 2708−1/A1............
− Loosening and Tensioning of Cylinder Cover Elastic Studs 2708−2/A1................
− Machining of Sealing Face for Injection Valve 2708−3/A1............................
Injection Valve with FAST
: Checking, Dismantling, Assembling and Adjusting 2722−1/A2...
Starting Air Valve: Removal, Fitting and Dismantling, Grinding-in and Assembling2728−1/A1
Relief Valve for Cylinder Cover 2745−1/A1...........................................
 Exhaust Valve
− Removal and Fitting of Exhaust Valve, Replacing of Elastic Studs 2751−1/A1..........
− Dismantling and Assembling 2751−2/A1..........................................
− Replacing and Grinding the Valve Seat 2751−3/A1.................................
− Grinding the Seating Surface on the Valve Head 2751−4/A1.........................
C
y
linder Liner and C
y
linder Cover Grou
p
2
Winterthur Gas & Diesel Ltd. RT−flex58T−E / MM / 2013