Marine Installation Manual 2021-08 6
List of Changes
X72DF
Revision: 01 Date of issue: 2018-03
Location of change Subject
1.2 Primary engine data Table 1-1 updated
1.5.4 Dynamic Combustion Control Note added
2.1 Pressure and temperature ranges New link to MIDS replaces former table 2-1
2.2.2 Load range
Load range limit with controllable pitch propeller Figure 2-10 updated
2.5 Electrical power requirement Table 2-1, Turning gear: power supply data corrected
Table 2-1, UNIC power supply: figures rounded to the nearest decimal
3.1 Dimensions and masses Table 3-1: dimensions for F1, F2, F3 updated
4.2 Cooling water system
Separate HT circuit with own cooler Text corrected
4.4.1 Fuel oil system components Fuel oil feed pump specification corrected
4.6 Gas fuel system Whole section revised: more detailed information added
4.6.3 Gas specifications Table 4-10 updated
4.6.4 Gas supply pressure Figure 4-21: new design gas pressure requirement introduced
4.6.9 Purging by inert gas Table 4-11: dew point corrected; max. oxygen content increased
4.8 Leakage collection system and washing devices
Sludge oil trap Text added
6.4 Torsional vibration
High-energy vibrations Update of energy dissipation and flow rate values
7.2.2 Exhaust noise
Silencer in exhaust line Information changed
Revision: -- Date of issue: 2017-12
Location of change Subject
Entire document The present Marine Installation Manual (MIM) is published in a completely new version
with a new layout.
It supersedes former MIM version ‘a4’ dated 28 February 2017.
All future changes and updates (revisions) will be tracked and described based on the
present Manual.
To Next Page
Loading...
Need help?
General
