EasyManua.ls Logo

Winget 4B2000 - Adjustments

Winget 4B2000
282 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ROAD SPEEDS
1st Gear 2nd Gear 3rd Gear Reverse
Km/h (mph) km/h (mph) km/h (mph) km/h (mph)
Petter PH2
3.6 (2.2) 8.4 (5.2) 16.1 (10.0) 4.0 (2.5)
Lister ST2 and Lister-Petter TS/TR2
4.3 (2.7) 10.0 (6.2) 18.5 (11.5) 4.8 (3.0)
LUBRICANTS AND FLUIDS Total oils (factory fill) Capacities
TS/TR2 Engine Lub. Oil Rubia H 10W/30 2.7 litres
Note: For engine oils used in temperatures above 30
o
C consult the Engine Handbook.
Gearbox Rubia B 20W/30 2.0 litres (approx)
Transfer Box EP85W/140 or EP140 gear oil 1.00 litre (approx)
Axles (Newage, with brakes) Universal plant oil or Transmission MP 3.5 litres
(Newage, without brakes) 2.5 litres
(Salisbury) Gear oil SAE 90 EP -----
Brake System (Supplied from hydraulic tank) Azzola ZS46 -----
Hydraulic System Azzola ZS46 29.5 litres (tank)
General Grease Multis EP2 as required
General Lubrication Oil Rubia B 20W/30 as required
TECHNICAL INFORMATION 4.3
SPECIFICATIONS
TYRE PRESSURES
Front 2.35 bar (35 lb in
2
)
Rear 2.35 bar (35 lb
in
2)
TYRES
Newage Axles
Standard 11.5/80 x 15
Alternative 7.5 x 16
(not to be used on rotating skips)
Salisbury Axles (Obsolete)
10/75 x 15
HYDRAULIC PRESSURE
120.7 bar (1750psi)
138 bar (2000psi) hyd. rotating skips only
ADJUSTMENTS
Wheel nuts torque 200 lbf ft (271 Nm)
Engine (See Engine Workshop Manual)

Related product manuals