SEAT, assembly A - 11
KAB XH2/P2N' to ISO 6683
Item Part no Serial no Description Qty
This seat assembly is used with and is included with R.O.P.S. kits…..
V602753 (see page A - 10)
V602754 (see page A - 10)
V602755 (see page E - 3A)
All 4B2000 dumpers which are fitted with a R.O.P.S. (Roll Over Protective
Structure) including 'Export' models must be fitted with this seat assembly.
Earlier versions of the KAB seating XL or XH suspension unit do not
meet the requirements of the ISO 6683 (Seat Belt Pull Test) and should not
be used in conjunction with a R.O.P.S.
1 V2005013 May-99 / SEAT, assembly c/w with seat belt 1
2 V2000954 SEAT, 'KAB P2N'
3 V602750 BRACKET, anchorage 1
4 V602752 SLIDE RAIL, assembly 1
5 V602751 UNIT, suspension 'XH2' (ISO 6683) 1
8 V602749 BELT, seat 1
10 V2004206 PLATE, clamp 2
11 267S05 WASHER, flat 4
12 17S04 WASHER, spring 4
13 11S03C SCREW, set 4
V601140 / issue 02 0800
To Next Page
Loading...
