Winix ZERO+ User Manual


English ZERO+ WiFi
AUTO AND SLEEP
Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
1. Auto Mode
Enables Auto operation based on the unit's air quality Smart Sensors.
ŵ
Press the Mode button to select Auto mode.
ˍ
The mode LED light will indicate when
‘Auto’ mode has been selected, and
operation will begin.
ˍ
Each time the Mode button is pressed,
the modes will be cycled. (Auto, Sleep,
Low, Medium, High, Turbo).

Note
ˍ
When in Auto Mode the fan speed is automatically adjusted
according to the indoor air quality. As the indoor air quality
improves, the fan speed will automatically be reduced. If the
indoor air quality decreases the fan speed will automatically
be increased.
ˍ
When unit is first started, Auto Mode is enabled and set to
Low fan speed.
2. Sleep Mode
ŵ
Press the Mode button to select Sleep mode.
ˍ
The mode LED light will indicate when
‘Sleep’ mode has been selected, and
operation in that mode will begin.

Note
ˍ
When Sleep mode is selected, the fan speed is automatically
set to Low. Fan speed can be changed by pressing the Fan
Speed (Mode) Button.
ˍ
When Sleep Mode is enabled, the Air Quality light is disabled.

Winix ZERO+ Specifications

General

Timer	Yes
Noise level	55 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Number of speeds	4
Suitable for room area up to	40 m²
Sustainability certificates	ENERGY STAR
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	5
Product color	Grey, White
Built-in display	No
Power consumption (max)	90 W

Weight and Dimensions

Depth	245 mm
Width	415 mm
Height	600 mm
Weight	8500 g