Winix ZERO+ User Manual


English ZERO+ WiFi
CONTROLS
Air Outlet Vent
Light Sensor
Detects the amount of
ambient light within
the environment, to
adjust the brightness
of the LED indicators.
Mode / Fan Speed Button
Every time the Mode button is
pressed, the Mode LED light will
cycle through the settings. (Auto,
Sleep, Low, Medium, High, Turbo)
Child Lock Indicator
LED light indicates
whether Child Lock mode
is enabled or disabled.
Timer Indicator
If timer has been set,
the LED light Indicates
the set time of operation.
PlasmaWave Indicator
Indicates whether
PlasmaWave is
enabled or disabled.
Timer / Air Quality Button
Press to cycle through and set
desired length of operation (1hr,
4hr, 8hr, [NO TIMER]).
Press and hold for 3 seconds to
enable or disable the Air Quality
light.
Smart Sensor
Automatically
detects indoor air
quality.
Wi-Fi Button
Enables or disables
Wi-Fi function.
Reset Button
After replacing a lter,
press the RESET button
for at least 5 seconds.
Power Button
Turns the unit on
or o.
Check Filter
Indicator
LED light indicates
when it is time to
change the lter.
PlasmaWave /
Child Lock Button
Enables or disables
PlasmaWave .
Press and hold for
3 seconds to enable
or disable the Child
Lock mode.

Winix ZERO+ Specifications

General

Timer	Yes
Noise level	55 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Number of speeds	4
Suitable for room area up to	40 m²
Sustainability certificates	ENERGY STAR
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	5
Product color	Grey, White
Built-in display	No
Power consumption (max)	90 W

Weight and Dimensions

Depth	245 mm
Width	415 mm
Height	600 mm
Weight	8500 g