Winix ZERO+ User Manual


English ZERO+ WiFi
MANUAL MODE, TIMER AND PLASMAWAVE
h
Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
3. Manual Mode (setting fan speed)
Users can opt to manually set the fan speed to Low, Medium, High or Turbo.
ŵ
Press the Mode button to select the desired
fan speed.
ˍ
The mode LED light will indicate the
selected fan speed, and operation will
begin.

Note
ˍ
When Manual Mode is in use, Auto and Sleep modes are
automatically disabled.
4. Timer
The timer can be set for when you want the unit to run for a specified period of time.
ŵ
Select the desired period by pressing the
Timer button.
ˍ
The Timer LED light will indicate the
selected length of operation.
ˍ
Every time the Timer button is pressed
the Timer LED light will cycle through
the settings.
(1hr, 4hr, 8hr, [NO TIMER]).

Note
ˍ
The WINIX SMART app will display how much time is
remaining on the timer.
5. PlasmaWave
h
By default, PlasmaWave
h
is enabled whenever the unit is powered on.
ŵ
Press the Plasma button when the power is
on to enable or disable this feature.

Winix ZERO+ Specifications

General

Timer	Yes
Noise level	55 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Number of speeds	4
Suitable for room area up to	40 m²
Sustainability certificates	ENERGY STAR
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	5
Product color	Grey, White
Built-in display	No
Power consumption (max)	90 W

Weight and Dimensions

Depth	245 mm
Width	415 mm
Height	600 mm
Weight	8500 g