Winix ZERO+ User Manual


English ZERO+ WiFi
INITIAL OPERATION
ŵ
Insert the unit plug into an electrical outlet.
ˍ
The Control Panel lights will turn on and
off.
Ŷ
Press the ‘Power’ button.

Note
ˍ
During the first 4minutes of power up, the Air Quality light
will flash as the Smart Sensors measure the air quality in the
environment, after which normal operation will begin.
ŷ
By default, when the unit first powers on, the
mode will be set to Auto with PlasmaWave
h
enabled.
ˍ
When in Auto Mode the fan speed will
be automatically adjusted according to
the environments air quality.
ˍ
PlasmaWave
h
works to remove harmful
airborne contaminants.

Note
ˍ
In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
ˍ
When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave
h
, it is normal and does not signify product
failure. To disable PlasmaWave
h
, see page 11.

Winix ZERO+ Specifications

General

Timer	Yes
Noise level	55 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Number of speeds	4
Suitable for room area up to	40 m²
Sustainability certificates	ENERGY STAR
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	5
Product color	Grey, White
Built-in display	No
Power consumption (max)	90 W

Weight and Dimensions

Depth	245 mm
Width	415 mm
Height	600 mm
Weight	8500 g