Winix ZERO+ User Manual


English ZERO+ WiFi
PARTICLE SENSOR CARE
Particle Sensors Care
For optimal performance of the Particle Sensor, which detects airborne dust and
ultrafine particles, clean it every two months. Clean it more frequently when the unit is
running in a place with high dust levels.
ŵ
Open the Particle Sensor cover.
Ŷ
Use a damp cotton swab to wipe the lens
and intake area of the Particle Sensor.
ˍ
To clean the sensor area, use only water.
Do not use volatile substances such as
alcohol or acetone.
Lens
Cotton swab
ŷ
Wipe away any remaining moisture with a
dry cotton swab.
Ÿ
Close the Particle Sensor cover.
ˍ
The Particle Sensor cover may be
cleaned using a vacuum cleaner.

Winix ZERO+ Specifications

General

Timer	Yes
Noise level	55 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Number of speeds	4
Suitable for room area up to	40 m²
Sustainability certificates	ENERGY STAR
Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	5
Product color	Grey, White
Built-in display	No
Power consumption (max)	90 W

Weight and Dimensions

Depth	245 mm
Width	415 mm
Height	600 mm
Weight	8500 g